Author Topic: EPMA Events (Meetings, Workshops, Seminars...)  (Read 47459 times)

Donggao Zhao

  • Post Doc
  • ***
  • Posts: 10
    • UT Austin Electron Microbeam Laboratories
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #15 on: July 29, 2015, 01:37:26 PM »
EPMA and SEM Short Course and Symposium at Nanjing University, December 15 to 19, 2014

A successful week long EPMA and SEM Short Course and Symposium was held at Nanjing University’s Xianlin Campus, Nanjing, China from December 15 to 19, 2014 (http://es.nju.edu.cn/zh-cn/NewDetail.aspx?ContentID=20141231-10242431~31511e85).

This short course admitted 28 participants among more than 90 people from universities, research institutes, and industries in China who would like to participate in this event. Considering effectiveness of afternoon lab demo sessions, maximum number of participants was initially set to 20. JEOL, Carl Zeiss, Oxford Instruments, Gatan, Zhongjingkeyi Technology Co., Ltd., etc. supported this short course and symposium. MAS member Dr. Donggao Zhao of the University of Texas at Austin was invited to be a lecturer for the short course.

Nanjing University intends to continue this annual EPMA and SEM short course and symposium in December of 2015.

John Donovan

  • Administrator
  • Emeritus
  • *****
  • Posts: 2936
  • Other duties as assigned...
    • Probe Software
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #16 on: August 02, 2015, 08:45:06 AM »
Probe Software will exhibiting at Microscopy & Microanalysis 2015 this summer in Portland, Oregon, August 2nd through 6th. See how our software methods and features can improve accuracy and save time for your EPMA lab!

M&M Tutorials 5:45 PM to 6:45 PM (17:45 to 18:45)

Monday- Julien Allaz: "Easy Acquisition and High Accuracy Quantitative Analysis in Probe for EPMA"
Tuesday- Karsten Goemann: "Multi-Point and Shared Backgrounds- Ultimate EPMA Accuracy for Traces in Complex Matrices"
Wednesday- John Donovan: "Fast and Easy Quantitative X-ray Mapping and Image Processing for EPMA"
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #17 on: August 06, 2015, 09:58:53 PM »
EPMA 2016
MAY 17‐19, 2016
University of Wisconsin
Madison, WI

http://www.microbeamanalysis.org/topical-conferences/epma-2016-1/epma-2016

Paul Carpenter: paul.carpenter.epma@gmail.com
The only stupid question is the one not asked!

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #18 on: December 09, 2015, 09:50:40 AM »
Golden Software is a seminar in Golden, Colorado at the Colorado School of Mines on their Surfer plotting product, Thursday January 7th 2016 for those that are interested:

http://www.goldensoftware.com/trainingclass?utm_source=Reminder&utm_medium=Email&utm_content=RegisterToday_users&utm_campaign=TrainingClass

This is the product (along with Grapher) that we utilize for rapid scripting of mapping results as described here:

http://probesoftware.com/smf/index.php?topic=73.msg544#msg544
The only stupid question is the one not asked!

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #19 on: December 15, 2015, 12:20:30 PM »
Golden Software is a seminar in Golden, Colorado at the Colorado School of Mines on their Surfer plotting product, Thursday January 7th 2016 for those that are interested:

http://www.goldensoftware.com/trainingclass?utm_source=Reminder&utm_medium=Email&utm_content=RegisterToday_users&utm_campaign=TrainingClass

This is the product (along with Grapher) that we utilize for rapid scripting of mapping results as described here:

http://probesoftware.com/smf/index.php?topic=73.msg544#msg544

Golden Software is now offering this Surfer training class on-line for those that cannot get to Golden, Colorado in person next month:

http://www.goldensoftware.com/trainingclass
The only stupid question is the one not asked!

Heather Lowers

  • Professor
  • ****
  • Posts: 34
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #20 on: January 19, 2016, 10:18:22 AM »
I would like to direct everyone's attention to the upcoming Topical Conference on Electron Probe MicroAnalysis (EPMA - TC)!

http://www.microprobe.org/topical-conferences/epma-2016-1/epma-2016

This 4-day event will take place May 16-19 in Madison and will consist of user meetings on the first day and then three days of tutorials, topical discussions and poster sessions.

The meeting is aimed at experienced SEM / EPMA users as well as people new to quantitative analysis by EPMA (WDS) or SEM (EDS). It will be a great opportunity to meet people, learn, discuss applications and ask many questions. More details below.

There will be support available for students and 'early career scholars'.  See attachment for funding program details.

Registration is now open. Please, mark the following dates in your calendars!

- Deadline for submission of abstracts is February 15, 2016.
- Deadline for submission of posters is March 1, 2016.
- Deadline for application for MAS Early Career Scholar support is March 1, 2016.




Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #21 on: January 25, 2016, 02:35:32 PM »
This is from an email from Julien Allaz:

Please, consider submitting an abstract before February 8th to…

Session A08: Quantitative and qualitative microanalysis by EPMA and SEM

=> http://www.microscopy.org/MandM/2016/program/submit.cfm

This session will cover advances in quantitative and qualitative microanalysis by EPMA and SEM using WDS and EDS detector systems, trace and light element microanalysis, complementary techniques applied to compositional mapping, the role of standard reference materials, and educational efforts directed toward improvements in microanalysis. We welcome contributed presentations from the scientific and vendor communities, and will highlight the efforts of young scientists and the role of education.

Invited speakers:
- Stuart Kearns (University of Bristol, UK)
- Ed Vicenzi (Smithsonian Institution)
- Dale Newbury (NIST)
- John T. Armstrong (Carnegie Institution for Science)
- Anette von der Handt (University of Minnesota)

Looking forward to see you in Columbus!
The only stupid question is the one not asked!

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #22 on: April 20, 2016, 08:56:27 AM »
Back by popular demand, two new hands-on Surfer training classes are scheduled in May!

Learn all about Surfer's powerful capabilities in the Surfer Core Features I class. This day long class will show you how to quickly go from raw data to visual model. The class will dive into data gridding techniques and how to create and customize popular map-types.

    When: Thursday, May 12th, 9am to 4pm Mountain Daylight Saving Time
    Where: Online format

http://www.goldensoftware.com/trainingclass?utm_source=May_Surfer&utm_medium=Email&utm_content=CoreFeaturesI&utm_campaign=TrainingClass#Surfer

Want to take your current Surfer skills to the next level? Sign up for the Surfer Core Features II class which builds upon the skills reviewed in Core Features I. Additionally, Core Features II will cover advanced grid operations, coordinate conversion, and other more in-depth Surfer features. The completion of Core Features I is not required for attendance at Core Features II.

    When: Wednesday, May 25th, 10am to 2pm Mountain Daylight Saving Time
    Where: Online format

http://www.goldensoftware.com/trainingclass?utm_source=May_Surfer&utm_medium=Email&utm_content=CoreFeaturesII&utm_campaign=TrainingClass#SurferCoreII

Hurry, sign up for either class by April 30th and receive 10% off with coupon code SRFR10.

Let me know if you have any questions.

Sincerely,
Emily Stewart
Training Coordinator
The only stupid question is the one not asked!

John Donovan

  • Administrator
  • Emeritus
  • *****
  • Posts: 2936
  • Other duties as assigned...
    • Probe Software
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #23 on: May 04, 2016, 07:31:32 AM »
We hope to see you all at the EPMA 2016 topical conference next month in Madison, Wisconsin. It should be lots of fun.  On Monday the 16th, Probe Software will host a user meeting in the afternoon and all JEOL and Cameca users are welcome to attend, but please send an email to Barbara, barbara@probesoftware.com, if you plan to attend so she has an idea of how many snacks to get for everyone!

John will give a short intro on what's new in Probe Software, and then we will have a number of very short (5 min) presentations from a few of our experts to stimulate discussion:

1. Mike Jercinovic: Using PictureSnap to obtain representative analyses
2. Dan Ruscitto: Microanalytical Challenges for Hydrous Glasses
3. Phil Gopon: Using non-traditional x-ray lines for nano-quantification
4. Anette von der Handt: Quantification and Output of X-ray Maps
5. Karsten Goemann: Using shared backgrounds for complex mineral analysis

See you all soon!
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

John Donovan

  • Administrator
  • Emeritus
  • *****
  • Posts: 2936
  • Other duties as assigned...
    • Probe Software
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #24 on: May 14, 2016, 07:16:27 PM »
We hope to see you all at the EPMA 2016 topical conference next month in Madison, Wisconsin. It should be lots of fun.  On Monday the 16th, Probe Software will host a user meeting in the afternoon and all JEOL and Cameca users are welcome to attend, but please send an email to Barbara, barbara@probesoftware.com, if you plan to attend so she has an idea of how many snacks to get for everyone!

John will give a short intro on what's new in Probe Software, and then we will have a number of very short (5 min) presentations from a few of our experts to stimulate discussion:

1. Mike Jercinovic: Using PictureSnap to obtain representative analyses
2. Dan Ruscitto: Microanalytical Challenges for Hydrous Glasses
3. Phil Gopon: Using non-traditional x-ray lines for nano-quantification
4. Anette von der Handt: Quantification and Output of X-ray Maps
5. Karsten Goemann: Using shared backgrounds for complex mineral analysis

See you all soon!

The Probe Software user meeting will be in the Union Hotel (same as the other vendor meetings), 3rd floor in the Industry room at 3:30.
« Last Edit: May 14, 2016, 07:25:41 PM by John Donovan »
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

John Donovan

  • Administrator
  • Emeritus
  • *****
  • Posts: 2936
  • Other duties as assigned...
    • Probe Software
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #25 on: May 29, 2016, 06:23:39 AM »
What a great meeting! 

The EPMA 2016 in Madison, WI last week was a resounding success and I personally want to thank the organizers.

The Probe Software user meeting was a particular success, drawing over 70 attendees (they had to get us a larger room!).

Lots of information was presented by the presenters (see previous post) and there was a lively discussion on many topics.

Just FYI: at the Cameca user meeting earlier in the day it was announced that Cameca and Probe Software have signed a formal agreement allowing Cameca to re-sell Probe for EPMA and Probe Image on their new instrument sales.

Thank-you to all the attendees.
« Last Edit: May 29, 2016, 09:41:26 AM by John Donovan »
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #26 on: August 01, 2016, 12:39:15 PM »
I wasn't able to attend this years M&M in Columbus, but please allow me to congratulate Mike Jercinovic here on his Presidential Science Award!

https://www.umass.edu/newsoffice/article/jercinovic-honored-microanalysis-society

Mike most certainly deserves this award given his many contributions to trace element precision and accuracy in EPMA!
john
The only stupid question is the one not asked!

Philipp Poeml

  • Professor
  • ****
  • Posts: 217
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #27 on: December 07, 2016, 06:22:35 AM »
EMAS 2017 and IUMAS-7 in Konstanz, Germany, May 7-11 2017

Dear colleagues,

(apologies for cross-posting)

If you haven't already done so, please consider joining us for EMAS 2017 - 15th European Workshop on Modern Developments and Applications in Microbeam Analysis and IUMAS-7 Meeting at the Bodensee in Konstanz, Germany from May 7th to 11th 2017.

Early bird registration for this event ends on March 15th 2017. The deadline for abstract submissions is February 28th 2017.

All details and on-line registration/abstract submission are available at:

http://www.microbeamanalysis.eu/

Best wishes
Philipp

Probeman

  • Emeritus
  • *****
  • Posts: 2430
  • Never sleeps...
    • John Donovan
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #28 on: December 07, 2016, 12:04:20 PM »
Apologies for "tooting my own horn", but just wanted to let anyone going to AGU next week in San Francisco know, that I am presenting on Tuesday, at 4:45 PM (not quite the last talk of the day!). Details here:

Abstract ID and Title: 122997: Improving Precision, Maintaining Accuracy, and Reducing Acquisition Time for Trace Elements in EPMA
Final Paper Number: V24C-04
Presentation Type: Oral
Session Date and Time: Tuesday, 13 December 2016; 16:00 - 18:00
Presentation Length: 16:45 - 17:00
Session Number and Title: V24C: New Insights on Igneous and Metamorphic Processes from Nontraditional Thermobarometers and Geospeedometers I
Location: Moscone South; 305

Hope to see you all there!
john
« Last Edit: December 07, 2016, 09:02:13 PM by Probeman »
The only stupid question is the one not asked!

hdemers

  • Post Doc
  • ***
  • Posts: 13
Re: EPMA Events (Meetings, Workshops, Seminars...)
« Reply #29 on: February 13, 2017, 08:22:11 AM »
Dear colleagues,

Paper submission for the Microscopy and Microanalysis 2017 Annual Meeting (St. Louis, MO, 6-10 August, 2017) is now open, and will close on 21 February. My co-conveners and I would like to draw your attention to: Symposium A04, Advances in programming of quantitative microscopy for biological and materials science. We are looking for submissions dealing with showcasing programs written by microscopists for their particular biological and materials applications, at encouraging the community to write or contribute to existing programs, and at promoting collaborative work that will allow the development of new ideas and projects in microanalysis. A full description of this session is included below. Papers may be submitted via the M&M2017 website: http://www.microscopy.org/mandm/2017/.

We are also pleased to announce the invited speakers for this symposium:
•   Nicholas Ritchie, NIST
•   Francisco de la Pena, Cambridge University
•   Ivan Bota, Antwerpen University
•   Marc De Graef, Carnegie Mellon University
We are very excited to hear from these experts on software and codes, and we look forward to hearing about your work as well. See you in St. Louis!
The organizers of Symposium A04: Hendrix Demers McGill University and Philippe T. Pinard Oxford Instruments NanoAnalysis.

Symposium Description:
Cutting-edge quantitative analyses do not only require state-of-the-art instruments but also innovative programs to collect and analyze data. The development of programs, scripts, and libraries opens the door to new applications of microanalysis, helps solve more challenging and important problems, and promotes the advancement of microscopy. This symposium aims at showcasing programs written by microscopists for their particular biological and materials applications, at encouraging the community to write or contribute to existing programs, and at promoting collaborative work that will allow the development of new ideas and projects in microanalysis. Contribution in the following categories and related subjects are welcome.

Topics of interest include:
•   Quantitative microscopy simulation codes (Monte Carlo, multi-slice, block waves)
•   Open source libraries (programming practices, community projects)
•   Practical biological and materials applications of these programs in the SEM, EPMA, TEM/STEM, AEM

Sincerely,
Hendrix and Philippe