Hi John, I think I did not express myself correctly. I should be more clear in what I am saying. Sorry. I try again:
What I did: I opened the dialogue, I typed in the beam current 250 into the Beam Current field , then I clicked "browse", I selected my file, I pressed "apply" and it remembered the file , but the beam current was given in the channel list as 20 nA. I opened the channel again, and the beam current in the field was written 20 nA, so not remembered. I typed in 250 into the Beam Current Field, selected "apply" and now I saw in the channel list (and also when reopening the channel) that it had saved 250. So I had to edit the channel twice to get both settings saved. Does that make more sense?
Do I understand correctly: On the right is a dialogue about "Select beam mode and..." where I can set the image shift. In your example this is set to 0 and 0. Is this overridden then by loading the column string?
Is it correct that the SX50 is not supported any more by the V10 of PfE? Maybe then it would be better to change the wording "column string" into "column conditions file" or something? Or is it still valid for the Jeol?