Author Topic: Beam Scan Calibration for NSS Mosaic Operations  (Read 6838 times)

John Donovan

  • Administrator
  • Emeritus
  • *****
  • Posts: 2731
  • Other duties as assigned...
    • Probe Software
Beam Scan Calibration for NSS Mosaic Operations
« on: March 07, 2014, 04:38:41 PM »
Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.
John J. Donovan, Pres. 
(541) 343-3400

"Not Absolutely Certain, Yet Reliable"

Probeman

  • Emeritus
  • *****
  • Posts: 2155
  • Never sleeps...
    • John Donovan
Re: Beam Scan Calibration for NSS Mosaic Operations
« Reply #1 on: December 22, 2014, 11:27:22 AM »
Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.

Note that there is now an even easier way to calibrate the beam scan in NSS.  Simply acquire a BSE or SE image and note the magnification. Then utilize that images, along with a stage scan image of the same area acquired with Probe Image, in the CalcImage Processing | Calibrate Beam Scan menu window as described here:

http://probesoftware.com/smf/index.php?topic=396.0
« Last Edit: December 22, 2014, 01:32:39 PM by John Donovan »
The only stupid question is the one not asked!