Probe Software Users Forum

Hardware => Thermo => Topic started by: John Donovan on March 07, 2014, 04:38:41 PM

Title: Beam Scan Calibration for NSS Mosaic Operations
Post by: John Donovan on March 07, 2014, 04:38:41 PM
Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.
Title: Re: Beam Scan Calibration for NSS Mosaic Operations
Post by: Probeman on December 22, 2014, 11:27:22 AM
Here is a short document from Thermo on adjusting the X and Y beam scan calibration for their "montage" feature.

Note that there is now an even easier way to calibrate the beam scan in NSS.  Simply acquire a BSE or SE image and note the magnification. Then utilize that images, along with a stage scan image of the same area acquired with Probe Image, in the CalcImage Processing | Calibrate Beam Scan menu window as described here:

http://probesoftware.com/smf/index.php?topic=396.0