Unfortunately, I don't have access to probe now to check whether we "Image locator" is installed in PFE at our probe or not, but I meant the following:
Can I calibrate ("three-points" calibration) the overall view of each block (using image with low magnification) then use the same calibration parameters for micro species in my blocks (with high magnification). It will allow me to safe time a lot, because I will use just one calibration parameters I took from macro image for 15-20 micro images.
In other words I want to:
1. calibrate large image #0 (A,B,C - calibration points)
2. choose measurement points on small images (#1,2,3) without extra calibration.
Please, see the attached