Hi John,
We have two off-line PC situations re PfE:
1) data processing mode (i.e. not “attached” to the microprobe and only Analyze! and Plot! tabs available)
2) full demo mode (i.e. “attached” to the microprobe and all four tabs available....)
“Users” who wish to have a copy of PfE on their laptop/PC will normally work in data processing mode, whereas myself and (I presume) the new incumbent (HC) use PfE off-line in full demo mode.
Question: Should the EDSSpectraInterfaceType = 0 (found as part of line 238 in the probewin.ini config file on my PC) be used for both above situations, or should EDSSpectraInterfaceType = 5 (Thermo NSS) be used for full demo mode (OR only on the EPMA itself with the EDS hardware attached)?
Cheers,
DAvid
QUT